Advertisement
Assembly instructions (continued)
STEP 17: Preparation to Attach Right Side Shelf.
WHAT YOU NEED:
two x M6*12mm screws (B)
Screw two M6*12mm screws (B)
into the upper holes on right side
panel of firebox, leave the screw
heads protruding approximately
five mm out.
STEP 18: Attach the Right Side Shelf.
WHAT YOU NEED:
one
x Right side shelf assembly
three x M6*12mm screws (B)
a) Hang the side shelf assembly
onto the protruding screws,
insert and partially tighten three
M6*12mm screws (B) into the
lower holes as shown.
b) Align the right side shelf front
panel to the main bbq control
panel, then tighten the upper
protruding screws.
Tighten all screws.
Page 17
FRONT
B x three
BACK
5mm
Advertisement
