3
28
Fuel system
G
Index fi nger throttle
Remove the bolt (A) and remove the throt-
tle from the handle.
Remove bolts (B) and (C).
Separate the halves of the throttle.
Check for wear on pins (A) and (B).
Replace the throttle control (C) and lever
arm (D) if necessary.
Check that the cables are properly
pressed into the cut-outs (E) and that the
throttle cable (F) is in the right groove.
If necessary, attach it with silicon adhesive
in order to facilitate assembly.
Check that the protective bellows (G) are
whole and that they are correctly mounted
over the ball on the cable.
Index fi nger throttle
Remove the bolt (A) that attaches the
throttle to the handle.
Be careful not to lose the nut.
Remove the throttle and remove bolts (B)
and (C).
Carefully separate the two halves of the
throttle.