Step 5 – How to make a user an Admin
To update the firmware on your Sat-Fi2 RAS, it is necessary to give admin privileges to a user.
Perform the following steps to make a Sat-Fi2 RAS user an admin:
1. Open a web browser
2. In the address bar enter:
http://192.168.1.1 or http://192.168.0.1
3. A Sat-Fi2 login screen will be displayed.
In the Username field, enter the Admin Username
•
(Default is admin)
•
In the Password field, enter the password (Default is admin)
•
Select the Login button.
4. The Sat-Fi2 Admin Console screen will be displayed.
Sat-Fi2 Desktop App User Guide
Page 10