Sat-Fi2 At A Glance - Globalstar Sat-Fi2 Quick Start Manual

SAT-FI2 AT A GLANCE

iOS APP HOME SCREEN
4
5
1
2
3
1. Current GPS Location Battery
2. Sat-Fi2 Connected Users Satellite Strength
3. Application Menu Registered
4. Logout Button S.O.S. Initiated
5. Status Bar
DEVICE OVERVIEW
1. Power LED 5. S.O.S. Button
2. Satellite LED 6. USB Power/Data Port
3. S.O.S. LED 7. External Power Port
4. Power Button
ANDROID APP HOME SCREEN
4
5
1
2
3
1. Current GPS Location Battery
2. Sat-Fi2 Connected Users Satellite Strength
3. Application Menu Registered
4. Logout Button S.O.S. Initiated
5. Status Bar
1 2 3
4
5
7
LED STATUS
POWERING ON All Green LEDs Blink in Forward/Reverse Direction until Sat-Fi2 Powers On
POWERING OFF
OPERATIONAL/STATUS
POWERED ON
POWERED OFF
BATTERY FULL
BATTERY CHARGING ON
BATTERY CHARGING OFF
BATTERY <25%
CONNECTED TO
SATELLITE
NOT CONNECTED
TO SATELLITE
S.O.S. CONNECTING
MODE
S.O.S. ESTABLISHED
MODE
CANCEL S.O.S. MODE
HIBERNATION MODE
Press the Power button to turn the Sat-Fi2 on. The
POWER BUTTON
LEDs will light up notifying you that the device is on.
Press and hold the S.O.S. button until the S.O.S. LED
S.O.S. BUTTON
turns green to initiate an S.O.S. with GEOS IERCC.
USB POWER/
Connect the USB Data/Power Cable to charge the battery and connect the Sat-Fi2 to a computer.
DATA PORT
HIBERNATION MODE:
As a default setting, the Sat-Fi2 will go into hibernation mode after 15 minutes of inactivity. The hibernation timer can be
configured from the settings menu in the app or web console.
When the Sat-Fi2 is in hibernation mode, the power LED performs a dimming blink in orange and green colors. To wake
6
up the Sat-Fi2 from hibernation mode, access the app and a notification will be displayed showing the Sat-Fi2 is waking
up from hibernation. You will also see the green lights scrolling through the Sat-Fi2 LED's. Additionally, pressing the power
button for 3 seconds will start the power off sequence.
NOTE: To initiate S.O.S. while in hibernation mode, press and hold down the S.O.S. button until the LED's start flashing.
This will wake up the device and initiate S.O.S. once a connection has been established.
POWER LED SATELLITE LED
Fast Blink Orange Fast Blink Orange
Normal Blink Green N/A
No LED No LED
Solid Green N/A
Double Blink Green N/A
Slow Blink Green N/A
Fast Blink Red N/A
N/A Normal Blink Green
N/A Normal Blink Red
N/A N/A
N/A N/A
N/A N/A
Green + Orange
No LED
(Bright/Dims/Off)
Press and hold the Power button down until all the LED's
start flashing orange. The device will then power off.
While S.O.S. is active, press and hold the S.O.S.
button until the S.O.S. LED turns red to cancel the
S.O.S. with GEOS IERCC.
S.O.S. LED
Fast Blink Orange
N/A
No LED
N/A
N/A
N/A
N/A
N/A
N/A
Solid Green
Normal Blink Green
Normal Blink Red
No LED