Table of Contents
Advertisement
VISIT TRANSMITTERS
Visit push button transmitter
Buttons and connections
Status LED
Front button
Radio key switches
Front cover
Technical specifications
In the box
Dimensions and weight
BE1420 Visit push button transmitter
Height: 66 mm, 2.6"
with pre-mounted alkaline battery
Width: 48 mm, 1.9"
Lanyard with safety clasp
Depth: 23 mm, 0.9"
Adhesive tape, screws and plugs
Weight: 50 g, 1.8 oz. incl. battery
Power and battery
Activation
Via the front button
Battery type
1 x 6 V PX28A alkaline or
1 x 6 V PX28L lithium
Maintenance and cleaning
Power consumption
Maintenance free
Active < 35 mA
Clean with a dry cloth
Idle position < 0.05 μA
Do not use household cleaners,
Operation time
aerosol sprays, solvents, alcohol,
Alkaline battery ~ 2 years
ammonia or abrasives
Lithium battery ~ 5 years
11
Signal switches
Hole for lanyard
Pre-mounted battery
Adhesive tape
2 x hole markings
Frequency and coverage
Frequency
314.91 MHz, 433.92 MHz or 868.30
MHz, depending on the region
Coverage
50 - 250 m, 55 - 273 yd. depending
on the radio frequency and the
characteristics of the building
Environment
For indoor use and outdoor use
in a protected location. Will not
withstand water or rain.
Operating temperature
15° to 35° C, 59° to 95° F
Relative humidity
5% to 95%, non-condensing
Using it as a caller button
The transmitter can be worn around your neck and
be used as a wireless caller button.
Here is how you use it:
1
Attach the lanyard to the transmitter.
2
Hang the transmitter around your neck.
Using it as a doorbell
The transmitter can also be used as a wireless doorbell. Here is how you set it up:
Mounting with screws
1
Carefully remove the transmitter front cover and make two holes on the markings.
2
Fix the unit to the wall using the supplied screws and put the cover back on.
1
Mounting with adhesive tape
1
Attach the adhesive tape to the back of the transmitter.
Clean the wall with the wet wipe and remove the protective film from the tape.
2
Mount the unit in a weather protected area by the front door.
1
www.bellman.com
Bellman Visit 868 Pushbutton transmitter
Model: BE1420
Frequency 868,3 MHz
Battery: 1 x 6V
Made in P.R.C. by Bellman & Symfon AB, Sweden
1
A
B
2
2
BE1420
2
12
Advertisement
Table of Contents
