Bellman & Symfon Visit User Manuals

Visit flash receiver with backup batteries

Hide thumbs Also See for Visit:

Table of Contents

Download this manual

FLASH RECEIVER WITH BACKUP BATTERIES

The Visit system consists of a number of radio transmitters and receivers. The transmitters detect different

events in the surrounding area and transmit a radio signal to the receivers. The receivers pick up this

signal and provide indications using light, sound and/or vibration.

The transmitter determines what type of light, sound or vibration should be displayed so that the reason for

the indication is evident. Read through the entire user manual first and then start to install the system.

Connect the power supply unit to the socket (7). Remove the backup battery tab found on the

bottom of the unit. This will activate the battery backup function.

1 of 5

Learn more about how to use the product.

5/23/2014 11:59 AM

Table of Contents

Do you have a question about the Visit and is the answer not in the manual?

Page 1 Learn more about how to use the product. FLASH RECEIVER WITH BACKUP BATTERIES The Visit system consists of a number of radio transmitters and receivers. The transmitters detect different events in the surrounding area and transmit a radio signal to the receivers. The receivers pick up this signal and provide indications using light, sound and/or vibration.
Page 2 A short press on the Test Button (9) activates BE1442 so that it repeats its last indication. On delivery all Visit units are tuned to the same Radio Key. If you have a neighbour with a similar system, you can change to different Radio Keys so that you do not affect each other’s systems.
Page 3 The Visit Flash Receiver can power a BE1270 Bellman Bed-shaker (accessory) connected to the socket (10). The bed shaker is placed under the pillow to wake the user up when the Visit Flash Receiver is activated.
Page 4 Rotatable reflector Flash Orange LED Green LED Yellow LED Red LED Connector for power supply unit Telephone input for analogue telephone Test button Vibrator output Cable holder Table support Green LED 4 of 5 5/23/2014 11:59 AM...

Be1442