Introduction; General Description; Tsoip-To-Asi Mode - DekTec DTM-3200 User Manual

DTM-3200 – OEM Ethernet TSoIP Converter
User Manual

1. Introduction

1.1 General description

The DTM-3200 is a compact OEM module to convert ASI to or from a Transport Stream over IP
(TS-over-IP or TSoIP). Next to the serial ASI interface, the unit supports a parallel interfac
direction of the conversion (TSoIP to ASI or ASI to TSoIP) can be configured programmatic
through the control interface.
The DTM-3200 is available in two models and a development kit (see also §3.3):
 DTM-3200 with standard pin headers (power connector is right-angle type);
 DTM-3200-RA with right-angle pin headers;
 DTM-3200-DEVKIT: DTM-3200 with power supply and cables.

1.2 TSoIP-to-ASI mode

When configured as TSoIP-to-ASI converter, the unit accepts unicast and multicast streams over i
Gigabit-Ethernet port. Key features include de-encapsulation of UDP or RTP, IP jitter removal and
error correction according to SMPTE 2022-1. The resulting stream is transmitted simultaneously o
the ASI output connector and the parallel pin header.
Figure 1. The PCB of the DTM-3200
DVB-ASI
DTM-3200
DVB-SPI
Figure 2. The DTM-3200 configured as IP-to-ASI converter
TSoIP
6