DekTec DTM-3200 User Manual page 26

DTM-3200 – OEM Ethernet TSoIP Converter
User Manual
Nr Variable
0x0A UDP port
0x0B IP-to-output delay 1..9942ms; Delay (ms) from IP input to
0x0C Multicast address When 'Addressing method' is 1, this is
0x0D #TP per IP
0x0E Status
0x0F Protocol
0x10 Index
0x11 Output type
0x12 Packet size
0x13 Bitrate
0x14 PCR present
0x15 Rate-change
counter
Manageable Items - Category 0x81 – IP receive
1..65535; UDP port number at which
the DTM-3200 listens for the incoming
TS
ASI output in milliseconds
the multicast address at which the
DTM-3200 listens for the incoming TS
Number of transport packets per IP
packet
Current operational status:
0 = Channel is enabled; no errors
detected
1 = Channel has been disabled
2 = Channel is enabled, but there is a
problem with the processing of the
received IP stream
Protocol used by the incoming IP
stream:
0 = UDP
1 = RTP
Channel index; always 1 for the
DTM-3200 (because it supports a single
channel only)
Identifies the type of output interface:
1 = ASI output
2 = parallel output
0 = 188 bytes
1 = 204 bytes
Estimated bitrate (in bps@188) of the
incoming TS
0 = No PCRs in incoming TS
1 = PCRs found in incoming TS
Counter that keeps the number of
bitrate changes detected on this
channel. During normal operation this
counter should remain constant
Description
26
Access Type
R/W (V) int16
R/W (V) int16
R/W (V) IP addr
RO int8
RO int8
RO int8
RO int32
RO int8
RO int8
RO int32
RO int8
RO int32