DTM-3200 – OEM Ethernet TSoIP Converter
User Manual
3.4.8 Stream status LED
This LED indicates the status of the ASI and parallel stream. The following colors are used for stat
indication:
Short red/green flashes
Red/green
Note: When the 'Rate Estimation' (category 0x81, setting 0x16) is set to 3, bitrate estimation in th
DTM-3200 is turned off and the stream status LED will always be Red/green.
Short green flashes
Long green flashes
Green
Red
3.4.9 DTM-3200 status LED
This LED indicates the current status of the DTM-3200. The following colors are used for
indication:
Red
Red/green
Green
ASI output mode
No output generated on ASI and parallel outputs
Generating live output on ASI and parallel outputs
ASI input mode
No carrier detected on ASI or parallel input
Carrier detected but no data on ASI or parallel input
Valid signal detected on ASI or parallel input
Erroneous signal detected on ASI or parallel input
Running in failsafe mode
Booting
Running in operational mode
18