Table of Contents
Advertisement
DTM-3200 – OEM Ethernet TSoIP Converter
User Manual
C.3 Writing to the DTM-3200
To demonstrate the writing of a setting, we write 0x1234 to the setting Number of parts (setting 7)
category Update firmware (category 0x80). This category requires an index to be sent to th
DTM-3200. The index is added with the -i argument. The command below assumes that
configuration settings are available in
DtmCmd -i 0 –w 0x80 7 0x1234
The parameters used in this command have the following meaning:
-i 0 Set the index to 0.
-w Set the command type to write.
0x80 7 0x1234 Specify command category 0x80, setting 7 and data 0x1234.
This command results into the following output:
DtmCmd - DTM-32xx Command Utility v1.0.1 (c) 2013 DekTec Digital
Video B.V.
- Category
- Setting
- Index
- Interface
- DTM address
- Serial path
- Serial baud
- Data written
DtmCmd.ini:
: 0x80 (Firmware update type 1 (DTM-3200))
: 0x07 (Number of parts)
: 0x00
: Serial
: 0x40
: COM3
: 9600
: 4660
40
Advertisement
Table of Contents
