Appendix A. Mechanical Dimensions - DekTec DTM-3200 User Manual

DTM-3200 – OEM Ethernet TSoIP Converter
User Manual

Appendix A. Mechanical Dimensions

Hardware revision R0, R1 and R2:
 The diameter of the mounting holes is 2.7mm (intended for M2.5 bolts)
 Maximum outer diameter of nut/ring: 7.0mm
Hardware revision R3:
 The diameter of the mounting holes is 3.2mm (intended for M3 bolts)
 Maximum outer diameter of nut/ring: 7.0mm
Warning: While mounting the DTM-3200, care should be taken not to damage components that ar
close to the mounting holes, both on the top and bottom side of the board.
36