Leica Zeno GG04 plus User Manual
Leica Zeno GG04 plus User Manual

Leica Zeno GG04 plus User Manual

Hide thumbs Also See for Zeno GG04 plus:

Advertisement

Quick Links

Leica Zeno GG04 plus
User Manual
Version 1.3
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zeno GG04 plus and is the answer not in the manual?

Questions and answers

Summary of Contents for Leica Zeno GG04 plus

  • Page 1 Leica Zeno GG04 plus User Manual Version 1.3 English...
  • Page 2 All other trademarks are the property of their respective owners. Validity of this This manual applies to all models of the Leica GG04 plus GNSS instrument. manual Where there are differences between the various instruments they are clearly described.
  • Page 3 Description myProducts Add all products that you and your company own and explore your world of Leica Geosystems: View detailed information on your products and update your products with the latest software and keep up- to-date with the latest documentation.
  • Page 4: Table Of Contents

    3.2.2 Battery for GG04 plus Equipment Setup as a Real-Time Rover 3.3.1 Setup with Leica Zeno GIS Hardware and Software 3.3.2 Setup with Third-Party Mobile Devices Connection with Leica Zeno GIS Software Correction Service Spot Lite and Spot Prime (PPP)
  • Page 5: Safety Directions

    Safety Directions General Introduction Description The following directions enable the person responsible for the product, and the person who actually uses the equipment, to anticipate and avoid opera- tional hazards. The person responsible for the product must ensure that all users understand these directions and adhere to them.
  • Page 6: Definition Of Use

    Responsibilities Manufacturer of the Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica product Geosystems, is responsible for supplying the product, including the User Man- ual and original accessories, in a safe condition.
  • Page 7: Hazards Of Use

    To be familiar with local regulations relating to safety and accident pre- • vention. To inform Leica Geosystems immediately if the product and the applica- • tion becomes unsafe. To ensure that the national laws, regulations and conditions for the oper- •...
  • Page 8 DANGER Risk of being struck by lightning If the product is used with accessories, for example on masts, staffs, poles, you may increase the risk of being struck by lightning. Danger from high vol- tages also exists near power lines. Lightning, voltage peaks, or the touching of power lines can cause damage, injury and death.
  • Page 9 WARNING Lightning strike If the product is used with accessories, for example masts, staffs, poles, you may increase the risk of being struck by lightning. Precautions: ▶ Do not use the product in a thunderstorm. WARNING Exposure of batteries to high mechanical stress, high ambient tempera- tures or immersion into fluids This can cause leakage, fire or explosion of the batteries.
  • Page 10 Risk of injuries to users and equipment destruction due to lack of repair knowledge. Precautions: ▶ Only authorised Leica Geosystems Service Centres are entitled to repair these products. CAUTION Not properly secured accessories If the accessories used with the product are not properly secured and the product is subjected to mechanical shock, for example blows or falling, the product may be damaged or people can sustain injury.
  • Page 11: Electromagnetic Compatibility (Emc)

    • Precautions: ▶ Do not open the product! ▶ Only Leica Geosystems authorised service centres are entitled to repair these products. Electromagnetic Compatibility (EMC) Description The term Electromagnetic Compatibility is taken to mean the capability of the product to function smoothly in an environment where electromagnetic radia- tion and electrostatic discharges are present, and without causing electromag- netic disturbances to other equipment.
  • Page 12 Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possi- bility that function of the product may be disturbed in such an electromag- netic environment.
  • Page 13: Fcc Statement, Applicable In U

    Precautions: ▶ Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems AG cannot completely exclude the possibility that other equipment can be disturbed or that humans or animals can be affected.
  • Page 14: Ised Statements (En/Fr), Applicable In Canada

    XXXXXXXX-XXXXXX S. No.:10412 2ICR19/66 Made in China A/S:+82 31 620 6252 전지 Leica Geosystems AG, CH-9435 Heerbrugg Manufactured by Huizhou Longji Electronics Co., Ltd. 005044_002 005044_002 ISED Statements (EN/FR), Applicable in Canada WARNING This Class (B) digital apparatus complies with Canadian ICES-003.
  • Page 15: Description Of The System

    Firmware concept The instrument is delivered with the latest firmware version installed. If a new firmware version is released at a later point in time, use the Leica Zeno GIS software on Windows to upload this version by a Bluetooth connection.
  • Page 16 Component Description Bluetooth To wireless pair with Leica Zeno GIS or third-party hardware. Battery The battery compartment holds the GEB212 battery for power supply. LEDs Indication of power, Bluetooth and signal reception. LEMO-1 connector Serial by RS232 or USB communication.
  • Page 17: Data Collection

    Leica Zeno GIS Software Description All Leica Zeno GIS hardware and software can utilise the GG04 plus with a sur- vey pole. The compatible hardware includes the Zeno 5, Zeno 10, Zeno 15, Zeno Tab 1, Zeno Tab 2, CS25, CS25 plus, CS25 GNSS, CS25 LRBT and selected Android, iOS or Windows devices.
  • Page 18: Accessories

    Accessories Description Extra equipment such as cables and universal pole holders are listed in the setup sections. Any further description of accessories is not part of this man- ual. Refer to the LeicaZeno GIS Equipment List. Description of the System...
  • Page 19: Operation

    For Li-Ion batteries, a single discharging and charging cycle is sufficient. • We recommend carrying out the process when the battery capacity indica- ted on the charger or on a Leica Geosystems product deviates significantly from the actual battery capacity available. Operation/ The batteries can be operated from −20 °C to +55 °C/−4 °F to +131 °F.
  • Page 20: Equipment Setup As A Real-Time Rover

    This chapter shows a possible pole setup with Leica Zeno GIS hardware and software. Connection between the GG04 plus instrument and the field controller is made through Bluetooth. All hardware is fixed on a Leica carbon pole in this exam- ple. The antenna is mounted directly using screw fitting.
  • Page 21: Setup With Third-Party Mobile Devices

    Zeno Connect to utilise the position in a third-party software. Connection between the GG04 plus instrument and the mobile device is made through Bluetooth. All hardware is fixed on a Leica carbon pole in this exam- ple. The antenna is mounted directly using screw fitting.
  • Page 22: Connection With Leica Zeno Gis Software

    ☞ eral minutes. Principle of Zeno Connect is the configuration software for your Leica GG04 plus Smart Zeno Connect Antenna. With Zeno Connect the highly accurate position achievable with the GG04 plus antenna can be utilised by location aware applications running on iOS, Android or Windows.
  • Page 23 Different versions There are three different versions of Zeno Connect available. One for iOS, one available for for Android and one for Windows. Zeno Connect Zeno Connect for iOS and Android is available for download from the respec- tive App Stores. A valid internet connection is necessary. Unlike the Windows Zeno Connect version, a license for Zeno Connect on Android smartphones and tablets or iPhone and iPad is included with the GG04 plus antenna pur- chase.
  • Page 24 Leica Zeno Mobile is an Android app available on selected Android phones and Zeno Mobile tablets and the Leica Zeno 20 handheld data collector. The aim of Zeno Mobile is to keep things simple while still offering a host of professional data capture functions to increase productivity in the field.
  • Page 25: Correction Service Spot Lite And Spot Prime (Ppp)

    When paired with the Leica GG04 plus Smart Antenna, Zeno Mobile captures points, line and polygon data down to 1‑2 centimetres accuracy in even the most demanding GNSS environments. Different versions available for Zeno Mobile There are two different versions of Zeno Mobile available for download from...
  • Page 26 Spot corrections include GLONASS, Galileo and BeiDou information. ☞ To optimize the GG04 plus spot performance, think about adding GNSS options to support those satellite systems. Service activation After ordering the subscription service, activate the respective Spot option once within 30 days of the order date. To complete the activation process, switch on the antenna and leave it running in very good GNSS conditions for up to three hours.
  • Page 27: Care And Transport

    Shipping When transporting the product by rail, air or sea, always use the complete original Leica Geosystems packaging, container and cardboard box, or its equivalent, to protect against shock and vibration. Shipping, transport of When transporting or shipping batteries, the person responsible for the prod-...
  • Page 28 Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the con- necting cables. Care and Transport...
  • Page 29: Technical Data

    Technical Data Tracking Characteristics GG04 plus Satellite reception Multi-frequency Instrument channels ☞ Depending on the satellite systems and signals configured, a max- imum number of 555 channels is allocated. Supported signals System Signal L1 C/A, L2P, L2C, L5 GLONASS L1, L2 Galileo E1, E5a, E5b, AltBOC, E6 BeiDou...
  • Page 30: Technical Data

    Horizontal real-time SBAS, PPP or external source. accuracy Type Accuracy SBAS, L1 only < 0.9 m Spot Lite, PPP (Multi-fre- < 60 cm , after approximately eight minutes quency option needed) of converging DGNSS, L1 only < 40 cm Spot Prime, PPP (Multi-fre- <...
  • Page 31: Conformity To National Regulations

    FCC Part 15 (applicable in US) • national regulations Hereby, Leica Geosystems AG, declares that the radio equipment type • GG04 plus is in compliance with Directive 2014/53/EU and other applica- ble European Directives. The full text of the EU declaration of conform- ity may be consulted at http://www.leica-geosystems.com/ce.
  • Page 32: Dangerous Goods Regulations

    Leica Geosystems has developed Guidelines on “How to carry Leica ☞ products” and “How to ship Leica products” with Lithium batteries. Before any transportation of a Leica product, we ask you to consult these guidelines on our web page (http://www.leica-geosystems.com/dgr) to ensure that you are in accordance with the IATA Dangerous Goods Regulations and that the Leica products can be transported correctly.
  • Page 33: Software Licence Agreement

    Rights, Limitation of Liability, Exclusion of other Assurances, Governing Law and Place of Jurisdiction. Please make sure, that at any time you fully comply with the terms and conditions of the Leica Geosystems Software Licence Agreement. Such agreement is provided together with all products and can also be refer- red to and downloaded at the Leica Geosystems home page at http://leica-geosystems.com/about-us/compliance-standards/legal-documents...
  • Page 34: Appendix A Firmware Upgrade

    Connect the GG04 plus to your computer by Bluetooth. Use Leica Zeno Firmware Upload Tool to upgrade the latest firmware version. Refer to the corresponding software documentation on how to connect the instrument to your device and how to use Leica Zeno GIS Tools. Firmware Upgrade...
  • Page 35: Appendix B Pin Assignments And Sockets

    Appendix B Pin Assignments and Sockets Description Some applications require knowledge of the pin assignments for the instru- ment ports. In this chapter, the pin assignments and sockets for the instrument ports are explained. Port at the instru- ment underside Lemo port (USB and serial) 012547_001...
  • Page 36 868033-1.3.0en Original text Published in Switzerland © 2019 Leica Geosystems AG, Heerbrugg, Switzerland Leica Geosystems AG Heinrich-Wild-Strasse CH-9435 Heerbrugg Switzerland Phone +41 71 727 31 31 www.leica-geosystems.com...

Table of Contents