KTM 250 EXC-F Six Days 2019 Setup Instructions page 5

2.1 Unpacking and setting up the vehicle
Condition
Packaging V2
–
Remove the box and the plastic packaging.
Info
An assistant prevents the motorcycle from falling
over.
To avoid damaging the motorcycle during the setup,
leave the protective film on the vehicle until you
E00851-10
have finished.
–
Remove the separate enclosure and unpack it. Check that
the scope of supply is complete using the enclosed pack-
ing list.
–
Have a lift stand available.
Lift stand (78129955100)
–
Carefully loosen and remove the tension belt of the footrest
mount.
Info
An assistant prevents the motorcycle from falling
over.
–
Together with an assistant, take the vehicle off the pallet.
–
Position the vehicle on a lift stand.
–
Check the vehicle for transport damage.
–
Remove the headlight mask with the headlight. (
402050-01
–
Position the turn signal indicator lamp
tion instrument bracket.
H01768-10
SETUP 2
p. 19)
1
in the combina-
3