KTM 250 EXC-F Six Days 2019 Setup Instructions page 37

3.19 Checking throttle cable routing
(EXC‑F EU/AU/AR/BR, EXC‑F Six Days)
–
Plug in connector
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line
using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
K00560-10
valve!
–
Lubricate the O-ring and connect plug-in connection
for the fuel line.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
(250 EXC‑F US)
–
Plug in connector
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line
using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
E00509-10
valve!
–
Lubricate the O-ring and connect plug-in connection
for the fuel line.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
Finishing work
–
Mount the seat. (
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank. (
3
for the fuel pump.
3
for the fuel pump.
p. 26)
p. 25)
p. 32)
WORK 3
4
4
35