Removing A Qic Tape From A Tzk10 Tape Drive; Summary; Removal Procedure - Digital Equipment DECpc AXP 150 User Information

Removing a QIC Tape from a TZK10 Tape Drive

Removing a QIC Tape from a TZK10 Tape Drive
This section describes how to remove a QIC tape from the TZK10

Summary

tape drive.
Removal Table 4–5 lists the steps that you must follow to remove a QIC
Procedure tape from a TZK10 tape drive.
Table 4–5 Removing a QIC Tape from a TZK10 Tape Drive
Step
1
2
3
4
5
4–10 Using Tape Drives
See your operating system or application documentation
for information on the software commands that dismount
or eject the QIC tape.
Action
Enter the operating
system commands to
dismount or eject the
QIC tape.
Press the eject button.
Open the door fully.
Remove the QIC tape.
Close the drive door.
Note
Result
The TZK10 makes a whirring
sound.
The dual-color LED flashes
green, then stays green when
the whirring sounds stop.
The drive door partially
opens.
The dual-color LED turns off.
The QIC tape partially ejects
from the TZK10.