System Fans
System Fan
Removal
7–38
Before the system is powered down, have the system
manager perform a system shutdown if needed.
There are three system fans on the bottom of the unit. To remove
a failed or damaged system fan:
Step
Action
1
Perform the system shutdown.
2
Power down the unit.
3
Remove all bulkhead cables from
rear.
4
Face the front of the unit.
Carefully tilt the unit back,
so it is resting on its rear panel.
5
Remove the fan screw.
6
Slide the fan boot as shown.
7
Disconnect the fan cable.
8
Remove the fan.
NOTE
Refer to Figure 7–19
–
–
–
Continued on next page