Lights and Switch Module
LSM Removal
Part Numbers
7–16
Before the system is powered down, have the system
manager perform a system shutdown if needed.
To remove a failed or damaged lights and switch module (LSM):
Step
Action
1
Perform the system shutdown.
2
Power down the unit.
3
Remove the top cover.
4
Remove the right side panel.
5
Disconnect the LSM cable.
6
Remove the four removable
rivets.
7
Remove the LSM module.
Description
Top cover
Front bezel
LSM cable
Removable rivets
LSM module
NOTE
Refer to Figure 7–8
–
–
–
–
Part Number
70–30266–01
74–43830–01
17–03501–01
12–36064–01
54–21145–02
Continued on next page
Quantity
1
1
1
4
1