Removing An Adjustable Height Stand - HP ProOne 600 Hardware Reference Manual

3. Rotate the stand down (2) until it clicks into place.

Removing an adjustable height stand

To remove the stand:
1. Remove all removable media, such as optical discs or USB flash drives, from the computer.
2. Turn off the computer properly through the operating system. Then turn off any external devices.
3. Disconnect the power cord from the AC outlet, and then disconnect any external devices.
4. Place the computer facedown on a soft flat surface. HP recommends that you set down a blanket, towel,
or other soft cloth to protect the bezel and screen surface from scratches or other damage.
5. Press the stand release latch.
6. Rotate the stand (1) away from the computer.
7. Slide the stand hooks (2) out of the computer.
Attaching and removing a stand 11