Installing The Optical Disc Drive - HP ProOne 600 Hardware Reference Manual

3. Connect the power and data cables to the hard drive.
4. Align the hard drive and slide it toward the edge of the computer (1) until the hard drive snaps into place,
and then secure it with a screw (2).

Installing the optical disc drive

The optical disc drive is located above the system components. To locate the optical disc drive on the system
board, see Locating internal components on page
Remove the blank covering the optical disc drive connector (1) and slide the optical disc drive enclosure
▲
into place (2). Optionally, secure it with two screws for stability (3).
NOTE: The optical disc drive can be installed in only one way.
24.
Replacing drives 29