Disconnecting Power; Webcam; Webcam Operation; Setting Up Windows Hello - HP ProOne 600 Hardware Reference Manual

Disconnecting power

1. Remove all removable media, such as optical discs or USB flash drives, from the computer.
2. Turn off the computer properly through the operating system. Then turn off any external devices.
3. Disconnect the power cord from the AC outlet, and then disconnect any external devices.

Webcam

With Skype® for Business installed, you can use the webcam in the following ways:
Stream online video conferences
●
Maintain security over conversations
●

Webcam operation

On the HP ProOne 600 21.5-inch or HP ProOne 400 23.8-inch computer, raise the webcam to unlock it.
▲
– or –
On the HP ProOne 400 20-inch, slide the webcam shutter to the right to open the webcam.
On the HP ProOne 600 21.5-inch or HP ProOne 400 23.8-inch computer, press the webcam down until it
▲
locks to close it.
– or –
On the HP ProOne 400 20-inch, slide the webcam shutter to the left to close the webcam.

Setting up Windows Hello

If the Windows® 10 operating system is installed on your computer, follow these steps to set up Windows
Hello facial recognition:
1. Select the Start button, select Settings, select Accounts, and then select Sign-in options.
2. Under Windows Hello, follow the on-screen instructions to add both a password and a 4-digit PIN. Then
enroll your fingerprint or facial ID.
Webcam 17