Disconnecting Cables; Adjusting The Computer; Adjusting A Fixed-Height Stand - HP ProOne 600 Hardware Reference Manual

Disconnecting cables

1. You may need to remove the security cable, if one is installed on the rear of the computer.
2. Disconnect the cables from the ports.

Adjusting the computer

This computer may ship with a fixed-height stand or an adjustable height stand.

Adjusting a fixed-height stand

This stand allows you to tilt the computer from -5° to 20° from the desktop.
To tilt the computer, grasp both top and bottom of the computer and adjust to the appropriate tilt.
14 Chapter 2 Setup