Electronics Line Prime Quick Start Installation Manual page 7

Step 2: Set detector's parameters
1. Go to the main menu select [9]>[1]>[1] (Programming > Devices > Zones)
2. Using the arrow keys select a specific zone and press '√ʹ.
3. Set the main parameters for each zone, according to Table 3.
Quick Option Name
Key
9>1>1>2 Zone Type
9>1>1>3 Arm Set
1 (F): The zone is included in Full arming
2 (P): The zone is included in Part arming
3 (PE): The zone is included in Perimeter arming
9>1>1>4 Descriptor
9>1>1>5 Bell (Siren)
9>1>1>6 Chime
9>1>1>7 Force Arm
Table 3: Parameter set
If required scroll thorough the other menu parameters and modify settings
Description and Notes
Type of alarm this zone generates
Arming methods in which the zone is included.
Descriptors help identify the device when you operate and
program the system.
Activate the siren when the zone is triggered
Activate the internal siren when the zone is triggered. Note: To
enable the chime option enable Global Chime option, [Quick key
7>12]
Enables you to arm the system even if this zone is not ready. For
the force arm feature to function, you must also enable force
arming in system options.
7