Table of Contents
Advertisement
4. Testing the System
Before leaving the site, it is important to fully test the system. Prime has several testing tools to
verify that the system will operate optimally, including the wireless communication
1.
Go to the main display and press '√ʹ
2.
Enter installer code
3.
Go to quick key displayed in Table 9
Quick
Option
key
7>0>3
WL Siren
Test
7>0>4
Siren Test
7>0>6
Walk Test
7>0>7>1
TX List
7>9>1
GSM Signal
Strength
Table 9: Quick keys
.
Description and Notes
The external siren is sounded briefly
Built-in siren is sounded briefly
A list of registered sensors appears. Trigger each sensor; when the
system receives a successful transmission from a sensor, the sensor is
removed from the list
This test is a scrollable inventory of all registered transmitters and their
last reported status. Using the arrow buttons, scroll through the
transmitter list. The TX list displays the zone/device number or
descriptor.(Press the
key to toggle the display) , the signal strength of
the last received transmission and the last received status of the
transmitter
Display the signal strength of the cellular network. In severe cases of
low GSM signal consider using external GSM antenna.
15
Advertisement
Table of Contents
Need help?
Do you have a question about the Prime and is the answer not in the manual?