Displaying The Configuration - Siemens SIRIUS 3TK2826 Manual

Configuration / project engineering

9.6 Displaying the configuration

9.6 Displaying the configuration
Displaying the configuration
accordance with configuration for
Figure 9-4
RESET in the event of a fault
Figure 9-5
Parameter marking
The operating instructions come with a perforated box featuring the markings of the
configuration parameters. This can be inserted in the device cover.
Further information
You will find further information on configuration in the section entitled "Connecting the
sensors".
38
Confirmation: SET/RESET
Press button briefly
All configuration LEDs on
for approx. 1 s (LED test)
All configuration LEDs off
for approx. 0.5 s
Configuration LEDs on in
approx. 5 s
Configuration LEDs off
Displaying the configuration
Confirmation: SET/RESET
Press button for 3 s
Restarting the unit
Reset in the event of a fault
3TK2826 safety relay
Manual, 08/2007, GWA NEB 926 1579-02 DS 02