Displaying Indications; Resetting Stored Indications - Siemens 7SR45 Manual

[sc_events_faults, 1, --_--]
Figure 6-3
You will find additional information about deleting and saving logs in

Displaying Indications

6.6.3
Displayed indications in Reydisp and on the on-site operation panel are supplemented with the following
information:
Table 6-2
Indications in
Log for operational indications
Log for fault indications

Resetting Stored Indications

6.6.4
Reset from Relay Fascia
Pressing the TEST/RESET▶ key activates all LEDs (LED test). When released, all stored indications, stored
LEDs, output contacts and fault displays are reset.
Reset via Binary Inputs
Reset by binary input Rst LEDs & O/Ps
indications, stored LEDs, output contacts, and fault indications are reset.
Reset with Reydisp Evolution
You can reset stored indications via Reydisp Evolution in online mode.
2 Rst LEDs_O/Ps for 7SR450x-xGA10-1AA0 variants
Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020
Event Record
Overview of Additional Information
Reydisp Information
Time stamp (date and time),
Function type,
Function action,
Function description
Entry number
Time stamp (date & time)
Setting group number
Function name
Current values
2
6.7.2 Saving and Deleting the
switches on all LEDs (LED Test). When the signal reverts, all stored
In Service Operation
6.6 Indications
Device Display Information
-
Entry number
Time stamp (date & time)
Setting group number
Function name
Current values
Logs.
75