Advertisement
WATCH FOR THIS SYMBOL. IT POINTS OUT IMPORTANT SAFETY
PRECAUTIONS. IT MEANS "ATTENTION – BE ALERT!"
It is your responsibility as an owner, operator, or supervision to know and instruct
everyone using this machine at the time of initial assignment and at least annually
thereafter, of the proper operation, precautions, and work hazards which exist in the
operation of the machine in accordance with OSHA regulations.
The following safety instructions, combined with common sense, will save your
equipment from needless damage and the operator from unnecessary exposure
to personal hazard. Pay special attention to the caution notes in the text. Review
this manual at least once a year with all operators.
1. Read and understand the operator's manual before operating this machine. Failure to do so is
considered a misuse of the equipment.
2. Make sure equipment is secure before operating.
3. Always keep children away from equipment when operating.
4. Make sure everyone that is not directly involved with the operation is out of the work area
before beginning operation.
5. Make sure all safety devices, shields, and guards are in place and functional before beginning
operation
6. Shut off all power to adjust, service, or clean.
7. Keep hands, feet, and clothing away from moving parts. It is a good idea to remove all jewelry
before operating.
8. Inspect the machine periodically during operation for signs of excessive wear, loose fasteners,
and unusual noises.
9. Always make sure the tractor is in park, wheels chalked if necessary, and hydraulic cylinder
stops on machine are in place before beginning any work on or around machine.
BEFORE BEGINNING INSTALLATION, PLEASE GO THROUGH YOUR ORDER TO
ENSURE THAT YOU HAVE THE CORRECT PARTS AND HARDWARE, AND THAT THE
QUANTITIES ARE CORRECT. USE THE PICTORIAL PART LIST BELOW TO GUIDE YOU.
BE ALERT!
YOUR SAFETY IS INVOLVED
Safety Is No Accident
4
Advertisement
