Appendix B: Installing A Laser Inclinometer - L-Acoustics K2 Owner's Manual

Installing a laser inclinometer
The K2 rigging system is compatible with the following laser inclinometers:
®
• TEQSAS
• LAP-TEQ PLUS (part of the L-ACOUSTICS
®
• TEQSAS LAP-TEQ (legacy model)
®
• KSG RECLINE Compact
®
• SSE ProSight
LAP-TEQ / LAP-TEQ PLUS sensor and display compatibility
The legacy LAP-TEQ sensors are compatible with the new TEQSAS
sensors are not compatible with the legacy displays.
®
TEQSAS LAP-TEQ PLUS / LAP-TEQ / KSG
Procedure
1. Remove the four M4 Torx screws (T20) from the plate.
2. Put thread-locker in the four threaded inserts.
3. Position the sensor so it points toward the front of the K2-BUMP.
4. Secure the sensor with the four screws.
5. Connect the XLR cable to the sensor.
6. Follow the manufacturer instructions to calibrate the inclinometer.
K2 owner's manual (EN) version 1.1
®
TECH TOOLCASE)
®
RECLINE Compact
Installing a laser inclinometer
®
LAP-TEQ PLUS displays. Conversely, the new
185