Fakir GALAXIS User Manual page 26

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
EN
Filling The Water Reservoir
NOTE!
Steam iron is designed for use with tap water, but if your water is very hard, it is
recommended to use purified water. The water reservoir must be drained after each use.
NOTE!
If you shall empty the water reservoir after cooling the steam iron, bring the iron to the
upright position by laying it on its back, plug the iron and wait for 2 minutes until it heats
by bringing the temperature adjustment knob to maximum position. Unplug the steam
iron.
Steam Ironing
Bring the temperature adjustment knob to " . ." or "..." position. Set the variable steam control
to the desired position.
CAUTION!!!
Avoid coming in contact with the sprayed steam.
Before filling the water reservoir with water, unplug the appliance.
Hold the steam iron in horizontal position. Pour water slowly from
the water inlet. Do not add water more than the mark on the
water reservoir to prevent overflowing of the water.
26

Advertisement

Table of Contents
loading

Table of Contents