Port Adapter Removal And Installation - Cisco PA-POS-2OC3 Installation And Configuration Manual

Port Adapter Removal and Installation

Port Adapter Removal and Installation
In this section, the illustrations that follow give step-by-step instructions on how to remove and install
port adapters in each of the following supported platforms:
•
•
•
•
•
•
•
•
For cabling information see the
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the midplane with your hand or any metal tool, or you could shock yourself. Statement 181
PA-POS-2OC3 Two-Port Packet-over-SONET Port Adapter Installation and Configuration
3-4
Cisco 7200 VXR Routers-Removing and Installing a Port Adapter, page 3-5
Cisco 7200 VXR Routers-Removing and Installing a Port Adapter in the Port Adapter Jacket Card,
page 3-6
Cisco 7201 Router-Removing and Installing a Port Adapter, page 3-8
Cisco 7301 Router-Removing and Installing a Port Adapter, page 3-9
Cisco 7304 PCI Port Adapter Carrier Card-Removing and Installing a Port Adapter, page 3-10
Cisco 7401ASR Router-Removing and Installing a Port Adapter, page 3-12
Cisco 7500 Series Routers and VIP-Removing and Installing a Port Adapter, page 3-13
Cisco 7600 Series Routers-Removing and Installing a Port Adapter, page 3-14
"Connecting PA-POS-2OC3 Interface Cables" section on page
Chapter 3 Removing and Installing Port Adapters
3-15.
OL-3028-06