IFM Efector600 TN2531 Operating Instructions Manual page 17

Response of the analogue output in case of a fault [Err], [OL], [UL]:
The set measuring range is not
reached
The set measuring range is exceeded
Detection zone of the sensor is not
reached or is exceeded (T < -60°C or T
> +160°C)
11 Scale drawing
�
��
�
���
Dimensions in mm
1: Display
2: LEDs
3: Programming button
4: Internal thread M18x15
→ Linear drop of the current signal up to
38 mA; the voltage signal remains at 0 V
→ Linear increase of the analogue signal to
205 mA / 103 V
→ Error message [Err];
Analogue signal acc to setting [FOU2]
�
�� �
��
UK
17