IFM Efector600 TN2531 Operating Instructions Manual page 13

• Change from menu level 1 to menu level 2:
► Press [Mode/Enter] until [EF] is
displayed
If the submenu is protected with an ac-
cess code, [Cod1] flashes in the display
► Press [Set] and keep it pressed until
the valid code no is displayed
► Press [Mode/Enter] briefly
On delivery by ifm electronic: no access
restriction
► Press [Set] briefly
> The first parameter of the sub-menu
is displayed (here: [HI])
With the user interface of the ifm Container program:
► Activate the [EF] button
If menu level 2 is protected by an access code, the input field for the code no is
activated
► Enter valid code no
• Locking / unlocking
The unit can be locked electronically to prevent unintentional settings
► Make sure that the unit is in the
normal operating mode
► Press [Mode/Enter] + [Set] for 10 s
> [Loc] is displayed
During operation: [Loc] is briefly displayed if you try to change parameter values
For unlocking:
► Press [Mode/Enter] + [Set] for 10 s
> [uLoc] is displayed
On delivery: unlocked
• Timeout:
If no button is pressed for 15 s during parameter setting, the unit returns to the operat-
ing mode with unchanged values
���������� ���
���������� ���
���������� ���
����
���������� ���
����
UK
13