Black & Decker KG2300 Manual page 5

Warning! Always use the side handle.
Fitting and removing grinding or cutting discs (fig. B - D)
Always use the correct type of disc for your application.
Always use discs with the correct diameter and bore size
(see technical data).
Fitting
Fit the guard as described above.
N
Place the inner flange (11) onto the spindle (6) as shown
N
(fig. B). Make sure that the flange is correctly located on
the flat sides of the spindle.
Place the disc (12) onto the spindle (6) as shown (fig. B).
N
If the disc has a raised centre (13), make sure that the
raised centre faces the inner flange.
Make sure that the disc locates correctly on the inner flange.
N
Place the outer flange (14) onto the spindle. When fitting
N
a grinding disc, the raised centre on the outer flange must
face towards the disc (A in fig. C). When fitting a cutting
disc, the raised centre on the outer flange must face away
from the disc (B in fig. C).
Keep the spindle lock (4) depressed and tighten the outer
N
flange using the two-pin spanner (15) (fig. D).
Removing
Keep the spindle lock (4) depressed and loosen the outer
N
flange (14) using the two-pin spanner (15) (fig. D).
Remove the outer flange (14) and the disc (12).
N
Use
Warning! Let the tool work at its own pace.
N
Do not overload.
Carefully guide the cable in order to avoid accidentally
N
cutting it.
Be prepared for a stream of sparks when the grinding or
N
cutting disc touches the workpiece.
Always position the tool in such a way that the guard
N
provides optimum protection from the grinding or cutting
disc.
Switching on and off
To switch the tool on, move the lock-off button (2) into the
N
unlock position and squeeze the on/off switch (1).
To switch the tool off, release the on/off switch.
N
Warning! Do not switch the tool off while under load.
Hints for optimum use
Firmly hold the tool with one hand around the side handle
N
and the other hand around the main handle.
When grinding, always maintain an angle of approx. 15°
N
between the disc and the workpiece surface.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots with a clean,
N
dry paint brush.
To clean the tool, use only mild soap and a damp cloth.
N
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
N
Connect the brown lead to the live terminal in the new plug.
N
Connect the blue lead to the neutral terminal.
N
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 13 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
ENGLISH
5