Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker angle grinder has been designed for sense when operating a power tool. Do not use a power grinding and cutting metal and masonry using the appropriate tool while you are tired or under the influence of drugs, type of cutting or grinding disc.
f. Keep cutting tools sharp and clean. Properly Do not use a damaged accessory. Before each use maintained cutting tools with sharp cutting edges are less inspect the accessory such as abrasive wheels for likely to bind and are easier to control. chips and cracks, backing pad for cracks, tear or excess g.
Kickback and related warnings The guard helps to protect operator from broken wheel Kickback is a sudden reaction to a pinched or snagged fragments and accidental contact with wheel. rotating wheel, backing pad, brush or any other accessory. Wheels must be used only for recommended applications.
Safety warnings specific for sanding operations When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons regularly Do not use excessively oversized sanding disc paper. using power tools in employment, an estimation of vibration Follow manufacturers recommendations, when exposure should consider, the actual conditions of use and the selecting sanding paper.
Fitting and removing sanding discs (fig. E & F) Fitting Place the tool on a table, with the spindle (5) facing up. For sanding, a backing pad is required. The backing pad is Place the spring washer (6) over the spindle and locate it available from your Black &...
Or run the battery down completely if it is integral and then switch off. Unplug the charger before cleaning it. Your charger does Technical data AST6 TYPE 3 CD105 TYPE 3 not require any maintenance apart from regular cleaning. Regularly clean the ventilation slots in your appliance/tool/ Input voltage charger using a soft brush or dry cloth.
Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised AST6/CD105/CD110/CD115 Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: Black &...
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...