Black & Decker KG2000 Instructions Manual

Black & Decker KG2000 Instructions Manual

Grinding tools
Hide thumbs Also See for KG2000:




Table of Contents

Summary of Contents for Black & Decker KG2000

  • Page 1 KG2000 KG2001...
  • Page 3 15 14 12...
  • Page 4: Intended Use

    ENGLISH (Original instructions) Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your Black & Decker angle grinder has been designed for protected supply. Use of an RCD reduces the risk of grinding and cutting metal and masonry using the appropriate electric shock.
  • Page 5 (Original instructions) ENGLISH d. Store idle power tools out of the reach of children and The arbour size of wheels, flanges, backing pads or do not allow persons unfamiliar with the power tool or any other accessory must properly fit the spindle of these instructions to operate the power tool.
  • Page 6: Kickback And Related Warnings

    ENGLISH (Original instructions) Safety warnings specific for grinding and abrasive Regularly clean the power tool's air vents. The motor's cutting-off operations fan will draw the dust inside the housing and excessive Use only wheel types that are recommended for your accumulation of powdered metal may cause electrical power tool and the specific guard designed for the hazards.
  • Page 7 (Original instructions) ENGLISH Residual risks. Support panels or any oversized workpiece to mini- mize the risk of wheel pinching and kickback. Large Additional residual risks may arise when using the tool which workpieces tend to sag under their own weight. Supports may not be included in the enclosed safety warnings.
  • Page 8: Electrical Safety

    ENGLISH (Original instructions) Labels on tool Warning! Never use the tool without the guard. The following pictograms are shown on the tool: Adjusting the guard (fig. B) Warning! To reduce the risk of injury, the user must The guard can be rotated 180°. read the instruction manual.
  • Page 9: Maintenance

    Regularly open the chuck and tap it to remove any dust from the interior (when fitted). Technical data Mains plug replacement (U.K. & Ireland only) KG2000 KG2001 If a new mains plug needs to be fitted: (Type 4) (Type 4) Safely dispose of the old plug.
  • Page 10: Ec Declaration Of Conformity

    To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can KG2000/KG2001 check the location of your nearest authorised repair agent Black & Decker declares that these products described under indicated in this manual.
  • Page 11 TYP. KG2000 - KG2001 3 - 4 43 44 45 53 54 55 04 - 11 - 09 E15701...
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

This manual is also suitable for:

Kg2001Kg750Kg751Kg701Kg902Kg901 ... Show all

Table of Contents