Download Table of Contents Print this page

Black & Decker KG1202 Original Instructions Manual

Hide thumbs Also See for KG1202:




Summary of Contents for Black & Decker KG1202

  • Page 1 KG1202...
  • Page 4: Intended Use

    If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your BLACK+DECKER KG1202 angle grinder has been protected supply. Use of an RCD reduces the risk of designed for grinding and cutting metal and masonry using electric shock.
  • Page 5 (Original instructions) ENGLISH e. Maintain power tools. Check for misalignment or Do not use a damaged accessory. Before each use binding of moving parts, breakage of parts and any inspect the accessory such as abrasive wheels for other condition that may affect the power tools chips and cracks, backing pad for cracks, tear or operation.
  • Page 6: Kickback And Related Warnings

    ENGLISH (Original instructions) Kickback and related warnings amount of wheel is exposed towards the operator. The guard helps to protect operator from broken wheel Kickback is a sudden reaction to a pinched or snagged fragments, accidental contact with wheel and sparks that rotating wheel, backing pad, brush or any other accessory.
  • Page 7 (Original instructions) ENGLISH Safety warnings specific for sanding operations Labels on tool Do not use excessively oversized sanding disc paper. The following pictograms along with the date code are shown Follow manufacturers recommendations, when on the tool: selecting sanding paper. Larger sanding paper extending Warning! To reduce the risk of injury, the user must beyond the sanding pad presents a laceration hazard and may cause snagging, tearing of the disc or kickback.
  • Page 8: Adjusting The Guard

    ENGLISH (Original instructions) Always position the tool in such a way that the guard Secure the flange with the screws (10). Make sure that the provides optimum protection from the grinding or cutting screws are fully tight and that the guard can be rotated. disc.
  • Page 9: Protecting The Environment

    Connect the brown lead to the live terminal in the new plug. Connect the blue lead to the neutral terminal. Warning! No connection is to be made to the earth terminal. KG1202 Angle Grinder Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
  • Page 10 ENGLISH (Original instructions) Guarantee Black & Decker is confident of the quality of its products and offers consumers a 24 month guarantee from the date of purchase. This guarantee is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
  • Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...