If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) Your BLACK+DECKER KG711, KG911, KG912, KG752 angle protected supply. Use of an RCD reduces the risk of grinders have been designed for grinding and cutting metal electric shock.
(Original instructions) ENGLISH flanges, the arbour hole of the accessory must fit the d. Store idle power tools out of the reach of children and locating diameter of the flange. Accessories that do not do not allow persons unfamiliar with the power tool or match the mounting hardware of the power tool will run these instructions to operate the power tool.
ENGLISH (Original instructions) The grinding surface of centre depressed wheels Using water or other liquid coolants may result in electro- must be mounted below the plane of the guard lip. An cution or shock. improperly mounted wheel that projects through the plane Note: The above warning does not apply for power tools of the guard lip cannot be adequately protected.
(Original instructions) ENGLISH Use extra caution when making a "pocket cut" into ex- and may be used for comparing one tool with another. The isting walls or other blind areas. The protruding wheel declared vibration emission value may also be used in a may cut gas or water pipes, electrical wiring or objects that preliminary assessment of exposure.
(Original instructions) guard for cutting operations part numbers 1004702-27 and Removing 1004702-28 for KG711/KG911 and KG912/KG752 is available Keep the spindle lock (3) depressed and loosen the outer and can be obtained from BLACK+DECKER service centres. flange (13) using the two-pin spanner (14) (fig. D).
plug. Spindle size Connect the blue lead to the neutral terminal. KG711, KG911, KG752 = 2.1 Warning! No connection is to be made to the earth terminal. Weight KG912 = 2.2 Recommended fuse: 13 A. KG711,KG911,KG912 Protecting the environment (sound pressure) 92.6 dB(A), Uncertainty (K) 3 dB(A)
Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and receive updates on new products and special offers. KG711, KG911, KG912, KG752 Angle Grinders Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN60745-1:2009 +A11:2010;...
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Aukland 1060 United Kingdom &...