Download Print this page

Black & Decker KG65 Manual

Hide thumbs

Advertisement

®
KG65
KG72
KG90

Advertisement

loading

  Also See for Black & Decker KG65

  Summary of Contents for Black & Decker KG65

  • Page 1 ® KG65 KG72 KG90...
  • Page 2 Congratulations! On the purchase of your Black & Decker small angle grinder. To ensure the best results from your small angle grinder please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual).
  • Page 3: Table Of Contents

    Contents Page 4 Safety instructions Additional safety instructions for small angle grinders Page 5 Double insulation Electrical safety Mains plug replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee Page 6 After sales service for your Black & Decker product Our after sales service policy Accessories Technical data...
  • Page 4: Safety Instructions

    Small angle grinder user manual SAFETY INSTRUCTIONS accessories. Inspect tool cords periodically and if Warning! When using electric tools, the following basic damaged have repaired by an authorised service safety precautions should always be taken to reduce facility. Inspect extension cords periodically and the risk of fire, electric shock and personal injury.
  • Page 5: Double Insulation

    ENGLISH • Check mounting flanges and the disc are correctly Fit a plug Fit a 5 amp fuse fitted and are undamaged. approved to approved • Ensure you are using the correct size and type of BS1362 to BS1363A disc for the task. •...
  • Page 6: After Sales Service For Your Black & Decker Product

    The level of sound pressure of this tool is in guard at the accordance with EEC legislation. You must wear ear required angle. protection when using this tool. Always tighten KG65 KG72 KG90* the clamp bolt. Disc diameter 115mm 115mm...
  • Page 7: Removing The Guard

    ENGLISH disc you can use is 115mm (KG65/KG72) and 125mm towards the disc. For cutting discs, the flange (b) is (KG90). The maximum thickness is 6mm and the centre fitted with the inner portion facing away from the disc. hole is 22mm.
  • Page 8: Handy Hints

    EC DECLARATION OF CONFORMITY of your angle We declare that units: KG65, KG72, KG90 conform to grinder. 89/392/EEC, 89/336/EEC, EN55014, 73/23/EEC, EN55104, EN50144, HD400, EN61000 A weighted sound pressure 97.7dB (A) • Always position the guard so that as much of the A weighted sound power 110.7dB (A)
  • Page 10 Australia Black & Decker (A’asia) Pty Ltd Tel: 03 9213 8200 286-288 Maroondah Highway Fax: 03 9726 7150 North Croydon, Victoria 3136 New Zealand Black & Decker Tel: 09 579 7600 483 Great South Road, Penrose, Auckland Fax: 09 579 8200 South Africa Black &...
  • Page 12 4/97.1...

This manual is also suitable for:

Kg72Kg90