To change a user password:
Select the User Password item and press <Enter>.
1.
From the Enter Current Password box, key in the current password, then
2.
press <Enter>.
From the Create New Password box, key in a new password, then press
3.
<Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password,
but press <Enter> when prompted to create/confirm the password. After you clear
the password, the User Password item on top of the screen shows Not Installed.
3.6
Boot menu
The Boot menu items allow you to change the system boot options.
3.6.1
Boot Configuration
Setup Prompt Timeout [3]
Input number of seconds to wait for setup activation key.
Bootup NumLock State [On]
[On]
[Off]
Quiet Boot [Disabled]
Configuration options: [Disabled] [Enabled]
Boot Option [Disabled]
Set system boot order.
Configuration options: [Disabled] [UEFI: Built-in EFI Shell]
3-22
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
EMB-BT1