Thermal Configuration - Aaeon EMB-BT1 Manual

3.3.6 Thermal Configuration
Critical Trip Point [90 C]
Specify the temperature at which the OS will shut down the system.
Configuration options: [90 C] [87 C] [85 C] [79 C] [71 C] [63 C] [55 C] [47 C] [39 C]
[31 C] [23 C] [15 C]
Passive Trip Point [85 C]
Specify the temperature at which the OS will begin adjusting the processor.
Configuration options: [90 C] [87 C] [85 C] [79 C] [71 C] [63 C] [55 C] [47 C] [39 C]
[31 C] [23 C] [15 C]
DPTF [Disabled]
Enables or disables Dynamic Platform and Thermal Framework.
Configuration options: [Enabled] [Disabled]
The following items appear only when you set DPTF to [Enabled]
CPU Sensor Participant/Ambient Sensor Participant/PDR Sensor
Participant
Set Critical and Passive temperature for sensors.
Configuration options: [35~125 C]
Super Debug [Disabled]
Configuration options: [Enabled] [Disabled]
Current Logical Processor [Disabled]
Controls LPO control preferences. Configuration options: [Enabled]
[Disabled]
Start P-State [P0]
Instructs the policy when to initiate Active Core control. Configuration options:
[P0~P12]
Step size [25%]
Instructs the policy to take away logical processors in percentage steps.
Configuration options: [75%] [50%] [25%]
Power Control Setting [CORE offlining]
Instructs the policy whether to use Core offlining or SMT offlining.
Configuration options: [CORE offlining] [Disabled]
Performance Control Setting [CORE offlining]
Instructs the policy whether to use Core offlining or SMT offlining.
Configuration options: [CORE offlining] [Disabled]
Chapter 3: BIOS setup
3-9