Table of Contents
Advertisement
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Enabled] [Disabled]
Restore AC Power Loss [Last State]
[Power On]
[Power Off]
[Last State]
Serial IRQ Mode [Continuous]
Configuration options: [Quiet] [Continuous]
BIOS Read/Write Protection [Enabled]
Allows you to enable or disable BIOS SPI region read/write protection.
Configuration options: [Enabled] [Disabled]
Device Mode [RS232]
Allows you to enable or disable BIOS SPI region read/write protection.
Configuration options: [RS232] [RS422] [RS485]
3-20
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever
the system state was before the AC power loss.
EMB-BT1
Advertisement
Table of Contents
