Table of Contents
Advertisement
Parallel Port Configuration
The sub-items in this menu allow you to set the parallel port configuration.
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE).
Configuration options: [Enabled] [Disabled]
Change Settings [Auto]
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5~12;] [IO=278h;
IRQ=5~12;] [IO=3BCh; IRQ=5~12;] [IO=378h;] [IO=278h;] [IO=3BCh;]
Device Mode [STD Printer Mode]
Allows you to select the Printer Port mode. Configuration options: [STD
Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP
Mode]
ERP Function [Enabled]
Enable/disable ERP power saving function. Configuration options: [Enabled]
[Disabled].
3-4
EMB-BT1
Advertisement
Table of Contents
