Table of Contents
Advertisement
To change a user password:
1.
Select the User Password item and press <Enter>.
2.
From the Enter Current Password box, key in the current password, then
press <Enter>.
3.
From the Create New Password box, key in a new password, then press
<Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user
password, but press <Enter> when prompted to create/confirm the password. After
you clear the password, the User Password item on top of the screen shows Not
Installed.
3.6
Boot menu
The Boot menu items allow you to change the system boot options.
3.6.1
Boot Configuration
Quiet Boot [Enabled]
This item enables/disables Quiet Boot. Configuration options: [Disabled] [Enabled]
Launch PXE ROM [Do not launch]
This item controls the execution of UEFI and Legacy. Configuration options: [Do
not Launch] [UEFI] [Legacy]
3.6.2
FIXED BOOT ORDER Priorities
Boot Option #1~#16
This item allows you to set the system boot order. Configuration options: [UEFI
USB Key] [UEFI Hard Disk] [UEFI USB Hard Disk] [UEFI Network] [UEFI USB Lan]
[UEFI CD/DVD] [UEFI USB CD/DVD] [UEFI USB Floppy][ USB Key] [Hard Disk]
[USB Hard Disk] [Network] [USB Lan] [CD/DVD] [USB CD/DVD] [USB Floppy][
Disabled]
3.6.3
UEFI NETWORK Drive BBS Priorities
This item specifies the boot device priority sequence from the available UEFI
network drives.
3-18
ATX-Q370A
Advertisement
Table of Contents
