Operation - Magnavox MR4207 Owner's Manual

BT (Bluetooth):
First time use or re-pairing the unit to a new BT device, pair as follows:
1. Power on the unit by slide
The unit will enter to BT (Bluetooth) mode automatically. Blue Indicator on the front of unit
will illuminate and blink.
2. Power on the external BT device and enter to BT searching mode. Start pairing following
the on screen instructions from the external BT device.
After paired, the Blue Indicator will stop blinking.
3. If pairing is complete you may now play music with your external BT device.
4. During playback:

Press the or

Press the
(Mute) Button on the Remote Control
the sound back.

(Play/Pause) Button on the Remote Control to pause; press again to resume
Press the
normal playback.

Turn the VOLUME Knob on the unit or press the VOL (Volume) +/- Buttons on the
Remote Control to adjust volume level as desired.
5. When finished listening,
the unit or press the
In Standby mode:

Press the Button on the Remote Control to turn on the unit. Or,
 Slide the Power ON/OFF Switch on the rear of unit to OFF position then slide to ON
position to turn on the unit.
NOTES:

For energy saving, if unit is not to be used for an extended period of time, turn off the unit
by slide the Power ON/OFF Switch to OFF position.
 When the external BT device searched the unit, our model number "MR4207" will appear
on the display of external BT Device.
 If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after pairing:
1. Turn on the BT function of the BT device.
2. Power on the unit by slide the Power ON/OFF Switch on the rear of unit to
(If the unit is in Standby mode, press the
it from Standby mode.)
Indicator on the front of unit will illuminate and blink.
3. Wait a few seconds until the unit is automatically paired to the external BT device.
(The Blue Indicator will stop blinking).
4. After pairing is complete you may now play music with your external BT device.

OPERATION:

the Power ON/OFF Switch on the rear of unit to ON position.
Buttons on the Remote Control repeatedly
slide the Power ON/OFF Switch to OFF position to power off
Button on the Remote Control to turn the unit to Standby mode.
Button on the Remote Control to power on
The unit will enter to BT (Bluetooth) mode automatically. Blue
6
to skip to desired track.
to turn off sound, press again to turn
ON position.