Magnavox MMA3680 - Stereo Portable Speaker with Color Changing Light and Bluetooth Wireless Technology Manual

Magnavox MMA3680 - Stereo Portable Speaker with Color Changing Light and Bluetooth Wireless Technology Manual

Also See for MMA3680:

Advertisement

Magnavox MMA3680 - Stereo Portable Speaker with Color Changing Light and Bluetooth Wireless Technology Manual

LOCATION OF CONTROLS

LOCATION OF CONTROLS

  1. (Skip Backward) Button
  2. (Skip Forward) Button
  3. BASS Volume Control Knob
  4. SOURCE Button
  5. (Play/Pause/Mute) Button
  6. Volume Control Knob
  7. Power (Decorative Lights) ON/OFF Switch
  8. Red Charging Indicator
  9. DC IN Port (Micro USB Port, for charging only)
  10. INDICATORS
  11. AUX IN Jack

POWER SOURCE

The unit has a built in Li-ion rechargeable battery, recharge it before use or when it is drained as follows:

  1. Connect the Micro USB Plug from the supplied USB Connection Cable to the Micro USB Port on the top of unit.
  2. Connect the full sized USB Plug from the supplied USB Connection Cable to the USB Port on the Personal Computer or USB Charger. (Persona l Computer and USB Charger NOT supplied).
  3. When c harging, the Red Charging Indictator on the top of unit will illuminate. When finished, it will turn off.
    POWER SOURCE

NOTES:

Your battery will last longer if you're following these simple guidelines for caring and storing:

  1. Before first time use, charge it approximately 4 hours until the unit is fully charged.
  2. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
  3. Do not charge longer than 24 hours. Excessive charging or running the unit until battery fully drains will damage battery. Battery life will be extended if you keep the battery fully charged.
  4. Battery life naturally shortens slowly over time.
  5. The rechargeable battery incorporated in this product is not user replaceable.

OPERATION

BT Mode
BT (Bluetooth) pairing:

First time use or re-pairing the unit to a new BT Device, pair as follows:

  1. Slide the Power (Decorative Lights) ON/OFF Switch to "ON + LIGHTS" position to power on the unit and the Decorative Lights.
  2. Or, slide the Power (Decorative Lights) ON/OFF Switch to "ON" position to power on the unit only.)
  3. The Blue Indicator on the top of unit will illuminate and blink.
  4. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the Blue Indicator will stop blinking.
  5. If pairing is complete you may now play music with your external BT Device.
  6. During playback
    • Turn the Volume Control Knob to adjust volume level as desired.
    • Turn the BASS volume Control Knob to adjust bass level (low audio frequency) as desired.
    • Press the Button on the unit to pause, press again to resume normal playback.
    • Press and release the orButtons repeatedly to skip tracks.
    • Slide the Power (Decorative Lights) ON/OFF Switch to "ON" position to turn off the Decorative Lights.
    • Slide the Power (Decorative Lights) ON/OFF Switch to "ON + LIGHTS" position to turn on the Decorative Lights.
    • If external audio device was connected to the unit through AUX IN l (LINE IN) Jack, press the SOURCE Button on the top of unit to enter to AUX IN mode. The color of the Blue Indicator will turn to Green. Press again to turn back to BT mode, the color of the Green Indicator will turn to Blue.
  7. When finished listening, slide the Power (Decorative Lights) ON/OFF Switch to "OFF" position to shut off the unit.

Notes:

  • When the external BT Device searched the unit, our model number "MMA3680" will appear on the display of external BT Device.
  • If while pairing you are asked for a code please try "0000" or "1234".

Normal operation after pairing:

  1. Power on the external BT Device and enter to BT playback mode.
  2. Power on the unit as previously instructed. The Blue Indicator on the top of unit will illuminate and blink.
  3. Wait a few seconds until the unit is automatically paired to the external BT Device. The Blue Indicator will stop blinking.
  4. After pairing is complete you may now play music with your external BT Device.

AUX IN (LINE IN):
To listen from an external Audio Player such as MP3 Player, Discman...etc.

  1. In power off mode, connect one end of the supplied Audio Connection Cable to the AUX Out / Line Out / Phone Jack on the external Audio Player.
  2. Connect the other end of the cable to the AUX IN Jack on the top of unit as illustrated below:
    OPERATION - AUX IN (LINE IN)
  3. Slide the Power (Decorative Lights) ON/OFF Switch to "ON + LIGHTS" position to power on the unit and the Decorative Lights.
  4. Or, slide the Power (Decorative Lights) ON/OFF Switch to "ON" position to power on the unit only.
  5. The Blue Indicator on the top of unit will illuminate.
  6. Press the SOURCE Button on the top of unit to enter to AUX IN mode, the color of the Blue Indicator will turn to Green.
  7. Play the music on the connected Player as usual. (Make sure the volume level of the connected Audio Player is turned to high level.)
  8. During playback:
    • Turn the Volume Control Knob to adjust volume level as desired.
    • Turn the BASS Volume Control Knob to adjust bass level (low audio frequency) as desired.
    • Press the Button on the unit to mute the sound, press again to turn the sound back.
    • Slide the Power (Decorative Lights) ON/OFF Switch to "ON" position to turn off the Decorative Lights.
    • Slide the Power (Decorative Lights) ON/OFF Switch to "ON + LIGHTS" position to turn on the Decorative Lights.
    • If external BT device was paired to the unit, press the SOURCE Button on the top of unit to enter to BT mode. The color of the Green Indicator will turn to Blue. Press again to turn back to AUX IN mode; the color of the Blue Indicator will turn to Green.
  9. When finished listening, slide the Power (Decorative Lights) ON/OFF Switch to "OFF" position to shut off the unit.

TROUBLESHOOTING GUIDE

Check the following before requesting service:

SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
Can't power on Built-in battery drained Recharge the battery
The unit in power off mode Slide the Power (Decorative Lights) ON/OFF Switch to "ON + LIGHTS" or "ON" position to power on the unit. The Blue Indicator on the top of unit will illuminate
No sound or sound weak Volume of the unit was set to minimum position Increase the volume level by turn the Volume Control Knob clockwise
Volume level of paired/connected device is in low level Rise the volume level of the paired/connected device
Sound distortion Volume level too high Reduce the volume level by turn the Volume Control Knob counterclockwise
Volume level of the paired/connected device too high Reduce the volume level of the paired/connected device
BT not functioning The external BT device had NOT paired to the unit Pair the external BT device to the unit
The external BT device too far from the unit Place the external BT device close to the unit

SPECIFICATIONS

Power source: Built-in DC3.7 V, 1200 mAh (4.44 WH) rechargeable Li-ion Battery Recharge by DC 5 V through DC IN Port (Micro USB Port) on the top of unit
Impedance of the speakers: 2 x 5 W; 2 ohm
Audio power: 3 W per Channel (Total 6 W, RMS)
BT Version: 4.1
BT Operation Distance: ≧32 Feet in open area

PACKAGE INCLUDES

1 x Owner's Manual
1 x USB Connection Cable (For charging only)
1 x Audio Connection Cables with 3.5mm Plugs

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Magnavox MMA3680 - Stereo Portable Speaker with Color Changing Light and Bluetooth Wireless Technology Manual

Advertisement

Need Assistance?

Do you have a question about the MMA3680 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents