Hitachi EH-RMP2 Applications Manual page 40

Chapter 4 Operation
Input area and output area are set within 256 words.
WL0/WL1000/WL2000...WL7000
WLFF/WL10FF/WL20FF...WL70FF
WL100/WL1100/WL2100...WL7100
WL1FF/WL11FF/WL21FF...WL71FF
WL200/WL1200/WL2200...WL7200
WL2FF/WL12FF/WL22FF...WL72FF
WL300/WL1300/WL2300...WL7300
WL3FF/WL13FF/WL23FF...WL73FF
※Unused area can not be used as normal internal output.
Figure 4.1.4-8 Using area of EH-RMP2 in the link area (Compatible mode)
!
CAUTION
Link area
Output area
Unused area
Input area
Unused area
The input / output area other than the data area mapped by the Configurator are ensured the
system area. Please don't use the input / output area other than the data area.
Depending on link parameter setting
4 – 16