(6) Double-click the "netX" in the main screen and select the "Device Assignment" on the same dialog as (5).
Wait to complete Scan progress.
Select device selection as "all". Then, device appears. Check the device and click the "OK" button.
①Click
(7) Right-click the "netX" in the main screen and click the "Download".
The message that the communication between master and slaves stops appears.
Make sure if it's no problem and click the "Yes" button.
Download of configuration is started to netX.
The following screen appears. When downloading is completed, this dialog disappears.
②Wait to complete Scan progress.
④Check
③Select "all"
4 – 11
Chapter 4
Operation
⑤Click