Configuration From Programming Tool - Hitachi EH-RMP2 Applications Manual

Chapter 4 Operation

4.1.4 Configuration from programming tool

EH-RMP2 operates in the EH-150 system as a link module. The link area of EH-RMP2 is allocated from one
nearer to CPU module. Link parameter setting is different in standard mode and compatible mode.
(1) Standard mode
The output area of EH-RMP2 must be fixed 512 words and the output area start address must be fixed 0.
The link parameter is set by programming tool which is different depending on CPU module.
Figure 4.1.4-1 The link parameter setting by LADDER EDITOR
Figure 4.1.4-2 The link parameter setting by Control Editor
Figure 4.1.4-3 The link parameter setting by EHV-CODESYS
4 – 13