(5) Right-click the "netX" in the main screen and click the "Network Scan". Then connected modules are found.
Click the "Create Devices" button.
(6) The following dialog appears after the network scan, click the "OK" button.
NOTE) If network scan is executed when configration is not executed, slots over mountable position are displayed
as "Empty". In addition, since "4 Analog Input (X4W)" is recognized as "64 Digital Input (X64)", remove "64
Digital Input (X64)" and add "4 Analog Input (X4W)".
4 – 7
Chapter 4
Operation