Connecting To Android Devices Using Wi-Fi Direct - Epson ET-M2120 Series User Manual

Adding or Replacing the Computer or Devices
Related Information
"Application for Printing Easily from a Smart Device (Epson iPrint)" on page 208
&
"Connecting to Devices other than iOS and Android using Wi-Fi Direct" on page 189
&

Connecting to Android Devices using Wi-Fi Direct

This method allows you to connect the printer directly to your Android device without a wireless router. The
following conditions are required to use this function.
❏ Android 4.4 or later
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Select Wi-Fi Setup on the home screen.
To select an item, use the
2. Select Wi-Fi Direct.
3. Check the message, and then press the OK button to proceed.
4. Check the message, and then press the OK button to proceed.
5. Select Android.
u d l r
buttons, and then press the OK button.
>
Connecting a Smart Device and Printer Directly (Wi
187
...