Paper Gets Jammed; Removing Jammed Paper - Epson ET-M2120 Series User Manual

Solving Problems
Code Situation
I-41
Paper Setup Auto Display is
disabled. Some functions cannot be
used.
I-60 Your computer may not support
WSD (Web Services for Devices).
Recovery The printer has started in recovery
Mode mode because the firmware update
failed.
Update
Firmware
Related Information
"Contacting Epson Support" on page 229
&
"Installing the Applications Separately" on page 107
&
"Updating the Printer's Firmware using the Control Panel" on page 112
&

Paper Gets Jammed

Check the error displayed on the control panel and follow the instructions to remove the jammed paper including
any torn pieces. Next, clear the error.
Important:
c
❏ Remove the jammed paper carefully. Removing the paper vigorously may cause damage to the printer.
❏ When removing jammed paper, avoid tilting the printer, placing it vertically, or turning it upside down;
otherwise ink may leak.

Removing Jammed Paper

1. Remove the rear cover.
> >

Paper Gets Jammed

Removing Jammed Paper
Solutions
If Paper Setup Auto Display is disabled, you cannot use AirPrint.
The scan to computer (WSD) feature is only available for computers
running English versions of Windows 10, Windows 8.1, Windows 8,
Windows 7 or Windows Vista. Make sure that the printer is correctly
connected to the computer.
Follow the steps below to try to update the firmware again.
1. Connect the computer and the printer with a USB cable.
2. Visit your local Epson website for further instructions.
150